Publications
Tagged As
1.5-um Tapered-Gain-Region Lasers with High-CW Output Powers
October 1, 1998
Journal Article
Published in:
IEEE Photonics Technol. Lett., Vol. 10, No. 10, October 1998, pp. 1377-1379.
Summary
High-power diode lasers consisting of a ridge-waveguide section coupled to a tapered region have been fabricated in 1.5um InGaAsP-InP multiple-quantum-well material. Self-focusing at high current densities and high-intensity input into the taper section has been identified as a fundamental problem in these devices that has to be dealt with. To date, continuous-wave output powers>1 W with=80% of the power in the near-diffraction-limited central lobe of the far field have been obtained through a judicious choice of device parameters.
Summary
High-power diode lasers consisting of a ridge-waveguide section coupled to a tapered region have been fabricated in 1.5um InGaAsP-InP multiple-quantum-well material. Self-focusing at high current densities and high-intensity input into the taper section has been identified as a fundamental problem in these devices that has to be dealt with. To...
READ MORE
CW operation of monolithic arrays of surface-emitting AlGaAs diode lasers with dry-etched vertical facets and parabolic deflecting mirrors
October 1, 1993
Journal Article
Published in:
IEEE Photonics Technol. Lett., Vol. 5, No. 10, October 1993, pp. 1146-1149.
Topic:
R&D area:
Summary
A monolithic two-dimensional array of surface-emitting AlGaAs diode lasers with dry-etched vertical facets and parabolic deflecting mirrors was mounted junction-side up on a W / Cu microchannel heatsink and evaluated under continuous-wave (CW) operating conditions. Both the facets and parabolic deflecting mirrors were etched using chlorine ion-beam-assistd etching. Threshold current densities of different sections of the array were consistently around 240 A/cm (to the second power), and measured CW differential quantum efficiencies were in the 46-48% range. CW power densities as high as 148 W/cm (to the second power) were achieved with an average temperature rise of less than 25 degrees C in this junction-side-up configuration.
Summary
A monolithic two-dimensional array of surface-emitting AlGaAs diode lasers with dry-etched vertical facets and parabolic deflecting mirrors was mounted junction-side up on a W / Cu microchannel heatsink and evaluated under continuous-wave (CW) operating conditions. Both the facets and parabolic deflecting mirrors were etched using chlorine ion-beam-assistd etching. Threshold current...
READ MORE