Publications

A 64 x 64-pixel test circuit was designed and fabricated in 0.18- m CMOS technology for investigating high-speed imaging with large-format imagers. Several features are integrated into the circuit architecture to achieve fast exposure times with low-skew and jitter for simultaneous pixel snapshots. These features include an H-tree clock distribution with local and global repeaters, single-edge trigger propagation, local exposure control, and current-steering sampling circuits. To evaluate the circuit performance, test structures are periodically located throughout the 64 x 64-pixel device. Measured devices have exposure times that can be varied between 75 ps to 305 ps with skew times for all pixels less than +-3 ps and jitter that is less than +-1.2 ps rms. Other performance characteristics are a readout noise of approximately 115 e- rms and an upper dynamic range of 310,000 e-.

Electronically shuttered solid-state imagers are being developed for high-speed imaging applications. A 5 cmx5 cm, 512x512-element, multiframe charge-coupled device (CCD) imager has been fabricated for the Los Alamos National Laboratory DARHT facility that collects four sequential image frames at megahertz rates. To operate at fast frame rates with high sensitivity, the imager uses an electronic shutter technology designed for back-illuminated CCDs. The design concept and test results are described for the burst-frame-rate imager. Also discussed is an evolving solid-state imager technology that has interesting characteristics for creating large-format x-ray detectors with short integration times (100 ps to 1 ns). Proposed device architectures use CMOS technology for high speed sampling (tens of picoseconds transistor switching times). Techniques for parallel clock distribution, that triggers the sampling of x-ray photoelectrons, will be described that exploit features of CMOS technology.