Publications
Tagged As
CoSPA data product description
November 1, 2021
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-449
Topic:
R&D area:
R&D group:
Summary
This document contains a description of Consolidated Storm Prediction for Aviation (CoSPA) data products that are packaged and distributed for external users. As described in Rappa and Troxel, 2013 [1] for Corridor Integrated Weather System (CIWS) data products, CoSPA products are categorized as gridded and non-gridded. Gridded products are typically expressed as rectangular arrays whose elements contain a data value coinciding with uniformly-spaced observations or computed results on a 2-D surface. Gridded data arrays map to the earth's surface through a map projection, for example, Lambert Conformal or Lambert Azimuthal Equal-Area. CoSPA generates only gridded products; there are no non-gridded data for CoSPA.
Summary
This document contains a description of Consolidated Storm Prediction for Aviation (CoSPA) data products that are packaged and distributed for external users. As described in Rappa and Troxel, 2013 [1] for Corridor Integrated Weather System (CIWS) data products, CoSPA products are categorized as gridded and non-gridded. Gridded products are typically...
READ MORE
Demand and capacity modeling for advanced air mobility
August 2, 2021
Conference Paper
Published in:
AIAA Aviation 2021 Conf., 2-6 August 2021.
Topic:
R&D area:
Summary
Advanced Air Mobility encompasses emerging aviation technologies that transport people and cargo between local, regional, or urban locations that are currently underserved by aviation and other transportation modalities. The disruptive nature of these technologies has pushed industry, academia, and governments to devote significant investments to understand their impact on airspace risk, operational procedures, and passengers. A flexible framework was designed to assess the operational viability of these technologies and the sensitivity to a variety of assumptions. This framework is used to simulate air taxi traffic within New York City by replacing a portion of the city's taxi requests with trips taken with electric vertical takeoff and landing vehicles and evaluate the sensitivity of passenger trip time to a variety of system wide assumptions. In particular, the paper focuses on the impact of the passenger capacity, landing site vehicle capacity, and fleet size. The operation density is then compared with the current air traffic to assess operation constraints that will challenge the network UAM operations.
Summary
Advanced Air Mobility encompasses emerging aviation technologies that transport people and cargo between local, regional, or urban locations that are currently underserved by aviation and other transportation modalities. The disruptive nature of these technologies has pushed industry, academia, and governments to devote significant investments to understand their impact on airspace...
READ MORE
NASA Airspace Integration Detect and Avoid Phase 2: Safety Risk Management Simulation Plan
December 18, 2020
Project Report
Published in:
MIT Lincoln Laboratory Report
Topic:
R&D area:
R&D group:
Summary
RTCA has been developing Minimum Operational Performance Standards (MOPS) for Detect and Avoid (DAA) and Command and Control (C2) systems as part of Special Committee – 228 (SC-228). The Phase 1 MOPS were published in 2017 and a Phase 2 effort to revise and extend the Phase 1 MOPS is ongoing. In order for the MOPS to be fully utilized, they must be evaluated by the FAA employing the FAA's Safety Risk Management (SRM) process. In order to support the SRM process, there is a need for simulation data focused on the safety of DAA encounters. This analysis focuses on gathering information to validate the use of SC-228 MOPS compliant DAA and C2 systems to enable routine UAS operations in the National Airspace System (NAS) without a chase aircraft or visual observers. The scope of this effort aligns with the SC-228 Terms of Reference (TOR) that can be generally characterized as UAS flying IFR and receiving ATC separation services. This analysis evaluates the system safety in mixed classes B, C, D, E, and G airspaces, and includes IFR, VFR, Cooperative, and Non-Cooperative aircraft. This analysis plan describes the four analysis tasks (Section 2) and the simulation plan (Section 3) that will be executed to accomplish these tasks. It is expected that this analysis plan will be extended to include the analysis results and become the final deliverable.
Summary
RTCA has been developing Minimum Operational Performance Standards (MOPS) for Detect and Avoid (DAA) and Command and Control (C2) systems as part of Special Committee – 228 (SC-228). The Phase 1 MOPS were published in 2017 and a Phase 2 effort to revise and extend the Phase 1 MOPS is...
READ MORE
Wind information requirements for NextGen applications phase 7 report
February 12, 2020
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-444
Topic:
R&D area:
Summary
This report details the Required Time of Arrival (RTA) performance of B757 aircraft arriving at various meter fixes across a range of altitudes from 33,000' down to 3,000' above ground level (AGL). The system tested demonstrated less than ±10 second arrival error in at least 95% of flights at meter fixes down to 7,000' AGL regardless of the forecast quality provided. Below 7,000' AGL, RTA performance significantly degraded demonstrating around 80% compliance under the best forecast and operating conditions. This report also provides a comprehensive lexicon of aviation and air traffic control related "wind" terms.
Summary
This report details the Required Time of Arrival (RTA) performance of B757 aircraft arriving at various meter fixes across a range of altitudes from 33,000' down to 3,000' above ground level (AGL). The system tested demonstrated less than ±10 second arrival error in at least 95% of flights at meter...
READ MORE
Wind information requirements for NextGen operations, phase 5 report
August 22, 2017
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-439
Topic:
R&D area:
R&D group:
Summary
NextGen applications with time-based control elements, such as required time of arrival (RTA) at a meter fix under 4D trajectory-based operations (4D-TBO)/time of arrival control (TOAC) procedures or assigned spacing goal between aircraft under Interval Management (IM) procedures, are subject to the quality of the atmospheric forecast utilized by participating aircraft. The work described in this report summarizes the major activities conducted in the current phase of this program which builds upon prior work. The major objectives were: 1. Support RTCA Special Committee-206 Aeronautical Information and Meteorological Data Link Services and co-chair a sub-group responsible for developing the document "Guidance for Data Linking Forecast and Real-Time Wind Information to Aircraft." 2. Analyze the performance of publicly available forecast as compared to in-situ reported atmospheric conditions, specifically comparing Global Forecast System (GFS) and High Resolution Rapid Refresh (HRRR) forecast data to recorded in-flight weather Meteorological Data Collection and Reporting System (MDCRS) data. 3. Analyze current and future Flight Management Systems (FMSs) to conduct operations at significantly lower altitudes than previous studies. 4. Evaluate potential sources of aircraft-derived winds to better support 4D-TBO activities. 5. Provide recommendations for high-value future work.
Summary
NextGen applications with time-based control elements, such as required time of arrival (RTA) at a meter fix under 4D trajectory-based operations (4D-TBO)/time of arrival control (TOAC) procedures or assigned spacing goal between aircraft under Interval Management (IM) procedures, are subject to the quality of the atmospheric forecast utilized by participating...
READ MORE
Terminal Flight Data Manager (TFDM) environmental benefits assessment
November 10, 2016
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-420
Topic:
R&D area:
R&D group:
Summary
This work monetizes the environmental benefits of Terminal Flight Data Manager (TFDM) capabilities which reduce fuel burn and gaseous emissions, and in turn reduce climate change and air quality effects. A methodology is created which takes TFDM "engines-on" taxi time savings and converts them to fuel and carbon dioxide (CO2) emissions savings, accounting for aircraft fleet mix at each of 27 TFDM analysis airports over a 2016-2048 analysis timeframe. Total fuel reductions of approximately 300 million U.S. gallons are estimated, resulting in monetized benefits from all TFDM capabilities of $65m-$582m undiscounted, $23m-$310m discounted, depending on the Social Cost of CO2 (SCC) and discount rate used. A similar methodology is used to estimate monetized benefits of reduced air quality emissions as well.
Summary
This work monetizes the environmental benefits of Terminal Flight Data Manager (TFDM) capabilities which reduce fuel burn and gaseous emissions, and in turn reduce climate change and air quality effects. A methodology is created which takes TFDM "engines-on" taxi time savings and converts them to fuel and carbon dioxide (CO2)...
READ MORE
En route sector capacity model final report
January 29, 2016
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-426
Topic:
R&D area:
R&D group:
Summary
Accurate predictions of en route sector capacity are vital when analyzing the benefits of proposed new air traffic management decision-support tools or new airspace designs. Controller workload is the main determinant of sector capacity. This report describes a new workload-based capacity model that improves upon the Federal Aviation Administration's current Monitor Alert capacity model. Analysts often use Monitor Alert sector capacities in evaluating the benefits of decision-support aids or airspace designs. However, Monitor Alert, which was designed to warn controllers of possible sector overload, sets sector capacity limits based solely on handoff workload and fixed procedural constraints. It ignores the effects of conflict workload and recurring workload (from activities such as monitoring, vectoring, spacing, and metering). Each workload type varies differently as traffic counts and airspace designs are changed. When used for benefits analysis, Monitor Alert's concentration on a single workload type can lead to erroneous conclusions. The new model considers all three workload types. We determine the relative contribution of the three workload types by fitting the model to the upper frontiers that appear in peak daily sector traffic counts from today's system. When we fit the Monitor Alert model to these same peak traffic counts, it can only explain the observed frontiers by hypothesizing large handoff workload. Large handoff workload would imply that decision-support aids should focus on handoff tasks. The new model fits the traffic data with less error, and shows that recurring tasks create significantly more workload in all sectors than do handoff tasks. The new model also shows that conflict workload dominates in very small sectors. These findings suggest that it is more beneficial to develop decision-support aids for recurring tasks and conflict tasks than for handoff tasks.
Summary
Accurate predictions of en route sector capacity are vital when analyzing the benefits of proposed new air traffic management decision-support tools or new airspace designs. Controller workload is the main determinant of sector capacity. This report describes a new workload-based capacity model that improves upon the Federal Aviation Administration's current...
READ MORE
Airspace flow rate forecast algorithms, validation, and implementation
December 15, 2015
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-428
Topic:
R&D area:
R&D group:
Summary
This report summarizes work performed by MIT Lincoln Laboratory during the period 1 February 2015 - 30 November 2015 focused on developing and improving algorithms to estimate the impact of convective weather on air traffic flows. The core motivation for the work is the need to improve strategic traffic flow management decision-making in the National Airspace System. The algorithms developed as part of this work translate multiple weather forecast products into a discrete airspace impact metric called permeability.
Summary
This report summarizes work performed by MIT Lincoln Laboratory during the period 1 February 2015 - 30 November 2015 focused on developing and improving algorithms to estimate the impact of convective weather on air traffic flows. The core motivation for the work is the need to improve strategic traffic flow...
READ MORE
Revised multifunction phased array radar (MPAR) network siting analysis
May 26, 2015
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-425
Summary
As part of the NextGen Surveillance and Weather Radar Capability (NSWRC) program, the Federal Aviation Administration (FAA) is currently developing the solution for aircraft and meteorological surveillance in the future National Airspace System (NAS). A potential solution is a multifunction phased array radar (MPAR) that would replace some or all of the single-purpose radar types used in the NAS today. One attractive aspect of MPAR is that the number of radars deployed would decrease, because redundancy in coverage by single-mission sensors would be reduced with a multifunction system. The lower radar count might then result in overall life cycle cost savings, but in order to estimate costs, a reliable estimate of the number of MPARs is needed. Thus this report addresses the question, "If today's weather and aircraft surveillance radars are replaced by a single class of multimission radars, how many would be needed to replicate the current air space coverage over the United States and its territories?" Various replacement scenarios must be considered, since it is not yet determined which of the organizations that own today's radars (the FAA, the National Weather Service (NWS), the different branches of the U.S. military) would join in an MPAR program. It updates a previous study using a revised set of legacy systems, including 81 additional military airbase radars. Six replacement scenarios were considered, depending on the radar mission categories. Scenario 1 would replace terminal radars only, i.e., the Airport Surveillance Radars (ASRs) and the Terminal Doppler Weather Radar (TDWR). Scenario 2 would include the Scenario 1 radars plus the long-range weather radar, commonly known as NEXRAD. Scenario 3 would add the long-range aircraft surveillance radars, i.e., the Air Route Surveillance Radars (ARSRs), to the Scenario 2 radars. To each of these three scenarios, we then add the military's Ground Position Navigation (GPN) airbase radars for Scenarios 1G, 2G, and 3G. We assumed that the new multimission radar would be available in two sizes--a full-size MPAR and a scaled-down terminal MPAR (TMPAR). Furthermore, we assumed that the new radar antennas would have four sides that could be populated by one, two, three, or four phased array faces, such that the azimuthal coverage provided could be scaled from 90 degrees to 360 degrees. Radars in the 50 United States, Guam, Puerto Rico, U.S. Virgin Islands, Guantanamo Bay (Cuba), and Kwajalein (Marshall Islands) were included in the study.
Summary
As part of the NextGen Surveillance and Weather Radar Capability (NSWRC) program, the Federal Aviation Administration (FAA) is currently developing the solution for aircraft and meteorological surveillance in the future National Airspace System (NAS). A potential solution is a multifunction phased array radar (MPAR) that would replace some or all...
READ MORE
Terminal Flight Data Manager (TFDM) runway balancing capability assessment
February 6, 2015
Project Report
Published in:
MIT Lincoln Laboratory Report ATC-421
Topic:
R&D area:
R&D group:
Summary
Under the Terminal Flight Data Manager program, new operational improvements are envisioned at a number of large airports. One operational improvement manifests through the Airport Resource Management tool, which seeks to balance departure demand at runways. Another related operational improvement is runway balancing, which is expected to provide greater flexibility in tactical runway assignments. Both improvements are expected to reduce surface delays for departing aircraft. This report provides a study into the potential delay-reduction benefits of both capabilities at three case-study airports (DFW, LAX, and MCO). Through a series of simulation studies, it is found that the benefits associated with each operational improvement are closely linked to departure demand and imbalances in demand across filed aircraft departure procedures. So, while large delay-reduction benefits are expected at LAX--which exhibits both large demand and departure imbalances--smaller benefits are expected at DFW where departure operations are already well-balanced. Meanwhile at MCO, the operational improvements are not expected to reduce delays due to limited departure demand at the airport.
Summary
Under the Terminal Flight Data Manager program, new operational improvements are envisioned at a number of large airports. One operational improvement manifests through the Airport Resource Management tool, which seeks to balance departure demand at runways. Another related operational improvement is runway balancing, which is expected to provide greater flexibility...
READ MORE