Publications

Refine Results

(Filters Applied) Clear All

Highly Efficient All-Optical Beam Modulation Utilizing Thermo-optic Effects

Summary

Suspensions of plasmonic nanoparticles can diffract optical beams due to the combination of thermal lensing and self-phase modulation. Here, we demonstrate extremely efficient optical continuous wave (CW) beam switching across the visible range in optimized suspensions of 5-nm Au and Ag nanoparticles in non-polar solvents, such as hexane and decane. On-axis modulation of greater than 30 dB is achieved at incident beam intensities as low as 100 W/cm2 with response times under 200 μs, at initial solution transparency above 70%. No evidence of laser-induced degradation is observed for the highest intensities used. Numerical modeling of experimental data reveals thermo-optic coefficients of up to −1.3 × 10−3 /K, which, to our knowledge, is the highest observed to date in such nanoparticle suspensions.
READ LESS

Summary

Suspensions of plasmonic nanoparticles can diffract optical beams due to the combination of thermal lensing and self-phase modulation. Here, we demonstrate extremely efficient optical continuous wave (CW) beam switching across the visible range in optimized suspensions of 5-nm Au and Ag nanoparticles in non-polar solvents, such as hexane and decane...

READ MORE

Use of mass spectrometric vapor analysis to improve canine explosive detection efficiency

Published in:
Anal. Chem., Vol. 89, 9 June 2017, 6482-90.

Summary

Canines remain the gold standard for explosives detection in many situations, and there is an ongoing desire for them to perform at the highest level. This goal requires canine training to be approached similarly to scientific sensor design. Developing a canine training regimen is made challenging by a lack of understanding of the canine's odor environment, which is dynamic and typically contains multiple odorants. Existing methodology assumes that the handler's intention is an adequate surrogate for actual knowledge of the odors cuing the canine, but canines are easily exposed to unintentional explosive odors through training material cross-contamination. A sensitive, real-time (~1 s) vapor analysis mass spectrometer was developed to provide tools, techniques, and knowledge to better understand, train, and utilize canines. The instrument has a detection library of nine explosives and explosive-related materials consisting of 2,4-dinitrotoluene (2,4-DNT), 2,6-dinitrotoluene (2,6-DNT), 2,4,6-trinitrotoluene (TNT), nitroglycerin (NG), 1,3,5-trinitroperhydro-1,3,5-triazine (RDX), pentaerythritol tetranitrate (PETN), triacetone triperoxide (TATP), hexamethylene triperoxide diamine (HMTD), and cyclohexanone, with detection limits in the parts-per-trillion to parts-per-quadrillion range by volume. The instrument can illustrate aspects of vapor plume dynamics, such as detecting plume filaments at a distance. The instrument was deployed to support canine training in the field, detecting cross-contamination among training materials, and developing an evaluation method based on the odor environment. Support for training material production and handling was provided by studying the dynamic headspace of a nonexplosive HMTD training aid that is in development. These results supported existing canine training and identified certain areas that may be improved.
READ LESS

Summary

Canines remain the gold standard for explosives detection in many situations, and there is an ongoing desire for them to perform at the highest level. This goal requires canine training to be approached similarly to scientific sensor design. Developing a canine training regimen is made challenging by a lack of...

READ MORE

Biomimetic sniffing improves the detection performance of a 3D printed nose of a dog and a commercial trace vapor detector

Published in:
Scientific Reports, Vol. 6 , art. no. 36876, December 2016. DOI: 10.1038/srep36876.

Summary

Unlike current chemical trace detection technology, dogs actively sniff to acquire an odor sample. Flow visualization experiments with an anatomically-similar 3D printed dog's nose revealed the external aerodynamics during canine sniffing, where ventral-laterally expired air jets entrain odorant-laden air toward the nose, thereby extending the "aerodynamic reach" for inspiration of otherwise inaccessible odors. Chemical sampling and detection experiments quantified two modes of operation with the artificial nose-active sniffing and continuous inspiration-and demonstrated an increase in odorant detection by a factor of up to 18 for active sniffing. A 16-fold improvement in detection was demonstrated with a commercially-available explosives detector by applying this bio-inspired design principle and making the device "sniff" like a dog. These lessons learned from the dog may benefit the next-generation of vapor samplers for explosives, narcotics, pathogens, or even cancer, and could inform future bio-inspired designs for optimized sampling of odor plumes.
READ LESS

Summary

Unlike current chemical trace detection technology, dogs actively sniff to acquire an odor sample. Flow visualization experiments with an anatomically-similar 3D printed dog's nose revealed the external aerodynamics during canine sniffing, where ventral-laterally expired air jets entrain odorant-laden air toward the nose, thereby extending the "aerodynamic reach" for inspiration of...

READ MORE

Reagent approaches for improved detection of chlorate and perchlorate salts via thermal desorption and ionization

Published in:
Rapid Commun. Mass Spectrom., Vol. 30, No. 1, 15 January 2016, pp. 191-8, DOI: 10.1002/rcm.7427.

Summary

RATIONALE: Techniques for improving the detectability of chlorate and perchlorate salts with thermal desorption based ionizers (i.e. radioactive, corona discharge and photoionization-based) are desired. This work employs acidic reagents to chemically transform chlorate and perchlorate anions into traces of chloric and perchloric acid. These high vapor pressure acids are easier to detect than the originating salts. METHODS: The efficacy of the reagent chemistry was quantified with a triple-quadrupole mass spectrometer interfaced with a custom-built thermal-desorption atmospheric-pressure chemical ionization (TD-APCI) source. Additional experiments were conducted using tandem IMS/MS instrumentation. Reagent pKa and pH values were varied in order to gain a better understanding of how those parameters affect the degree of observed signal enhancement. RESULTS: Samples of chlorates and perchlorates treated with liquid acidic reagents exhibit signal enhancement of up to six orders of magnitude compared with signals from untreated analytes. Three orders of magnitude of signal enhancement are demonstrated using solid-state reagents, such as weakly acidic salts and polymeric acids. Data is presented that demonstrates the compatibility of the solid-state approach with both MS and IMS/MS platforms. CONCLUSIONS: Several methods of acidification were demonstrated for enhanced vaporization and detection of chlorates and perchlorates. For applications where rapid surface collection and analysis for chlorates and perchlorates are desired, the solid-state approaches offer the simplest means to integrate the reagent chemistry into MS or IMS detection.
READ LESS

Summary

RATIONALE: Techniques for improving the detectability of chlorate and perchlorate salts with thermal desorption based ionizers (i.e. radioactive, corona discharge and photoionization-based) are desired. This work employs acidic reagents to chemically transform chlorate and perchlorate anions into traces of chloric and perchloric acid. These high vapor pressure acids are easier...

READ MORE

Nonlinear bleaching, absorption, and scattering of 532-nm-irradiated plasmonic nanoparticles

Published in:
J. Appl. Phys., Vol. 113. No. 5, 7 February 2013, 053107.

Summary

Single-pulse irradiation of Au and Ag suspensions of nanospheres and nanodisks with 532-nm 4-ns pulses has identified complex optical nonlinearities while minimizing material damage. For all materials tested, we observe competition between saturable absorption (SA) and reverse SA (RSA), with RSA behavior dominating for intensities above ~50 MW/cm^2. Due to reduced laser damage in single-pulse experiments, the observed intrinsic nonlinear absorption coefficients are the highest reported to date for Au nanoparticles. We find size dependence to the nonlinear absorption enhancement for Au nanoparticles, peaking in magnitude for 80-nm nanospheres and falling off at larger sizes. The nonlinear absorption coefficients for Au and Ag spheres are comparable in magnitude. On the other hand, the nonlinear absorption for Ag disks, when corrected for volume fraction, is several times higher. These trends in nonlinear absorption are correlated to local electric field enhancement through quasi-static mean-field theory. Through variable size aperture measurements, we also separate nonlinear scattering from nonlinear absorption. For all materials tested, we find that nonlinear scattering is highly directional and that its magnitude is comparable to that of nonlinear absorption. These results indicate methods to improve the efficacy of plasmonic nanoparticles as optical limiters in pulsed laser systems.
READ LESS

Summary

Single-pulse irradiation of Au and Ag suspensions of nanospheres and nanodisks with 532-nm 4-ns pulses has identified complex optical nonlinearities while minimizing material damage. For all materials tested, we observe competition between saturable absorption (SA) and reverse SA (RSA), with RSA behavior dominating for intensities above ~50 MW/cm^2. Due to...

READ MORE

Showing Results

1-5 of 5