Publications

The National Aeronautics and Space Administration (NASA), working with the Federal Aviation Administration (FAA), is developing a suite of decision support tools, called the Center/TRACON Automation System (CTAS). CTAS tools such as the Traffic Management Advisor (TMA) and Final Approach Spacing Tool (FAST) are designed to increase the efficiency of the air traffic flow into and through Terminal airspace. A core capability of CTAS is the Trajectory Synthesis (TS) software for accurately predicting an aircraft's trajectory. In order to compute these trajectories, TS needs an efficient access mechanism for obtaining the most up-to-date and accurate winds. The current CTAS weather access mechanism suffers from several major drawbacks. First, the mechanism can only handle a winds at a single resolution (presently 40-80 km). This prevents CTAS from taking advantage of high resolution wind from sources such as the Integrated Terminal Weather System (ITWS). Second, the present weather access mechanism is memory intensive and does not extend well to higher grid resolutions. This potentially limits CTAS in taking advantage of improvements in wind resolution from sources such as the Rapid Update Cycle (RUC). Third, the present method is processing intensive and limits the ability of CTAS to handle higher traffic loads. This potentially could impact the ability of new tools such as Direct-To and Multi-Center TMA (McTMA) to deal with increased traffic loads associated with adjacent Centers. In response to these challenges, M.I.T. Lincoln Laboratory has developed a new CTAS weather distribution (WxDist) system. There are two key elements to the new approach. First, the single wind grid is replaced with a set of nested grids for the TRACON, Center and Adjacent Center airspaces. Each and the grids are updated independently of each other. The second key element is replacement of the present interpolation scheme with a nearest-neighbor value approach. Previous studies have shown that this nearest-neighbor method does not degrade trajectory accuracy for the grid sizes under consideration. The new software design replaces the current implementation, known as the Weather Data Processing Daemon (WDPD), with a new approach. The Weather Server (WxServer) sends the weather grids to a Weather Client (WxClient) residing on each CTAS workstation running TS or PGUI (Planview Graphical User Interface) processes. The present point-to-point weather file distribution is replaced in the new scheme with a reliable multi-cast mechanism. This new distribution mechanism combined with data compression techniques greatly reduces network traffic compared to the present method. Other new processes combine RUC and ITWS data in a fail-soft manner to generate the multiple grids. The nearest-neighbor access method also substantially speeds up weather access. In combination with other improvements, the winds access speed is more than doubled over the original implementation.

This paper addresses the issue of developing weather-impacted routes for the Final Approach Spacing Tool (FAST). FAST relies on adaptation data that includes nominal terminal area routes and degrees of freedom to generate optimum landing sequences and runway assignments. However, during adverse weather some adapted routes may become unavailable due to the presence of hazardous weather. If FAST continues to generate trajectories using these routes, its schedule will not be accurate during the adverse weather. The objective of the study was to determine methods for incorporating severe weather products and weather-impacted route data into FAST.