Publications

The Federal Aviation Administration's Terminal Doppler Weather Radar (TDWR) system was primarily designed to address the operational needs of pilots in the avoidance of low-altitude wind shears upon takeoff and landing at airports. One of the primary methods of wind-shear detection for the TDWR system is the gust-front detection algorithm. The algorithm is designed to detect gust fronts that produce a wind-shear hazard and/or sustained wind shifts. It serves the hazard warning function by providing an estimate of the wind-speed gain for aircraft penetrating the gust front. The gust-front detection and wind-shift algorithms together serve a planning function by providing forecasted gust-front locations and estimates of the horizontal wind vector behind the front, respectively. This information is used by air traffic managers to determine arrival and departure runway configurations and aircraft movements to minimize the impact of wind shifts on airport capacity. This paper describes the gust-front detection and wind-shift algorithms to be fielded in the initial TDWR systems. Results of a quantitative performance evaluation using Doppler radar data collected during TDWR operational demonstrations at the Denver, Kansas City, and Orlando airports are presented. The algorithms were found to be operationally useful by the FAA airport controllers and supervisors.

During the summer of 1988, the Terminal Doppler Weather Radar (TDWR) Operational Test and Evaluation (OT&E) was conducted near Denver, CO. One of the objectives of this test was to assess the performance of the Gust Front Detection and Wind Shift Algorithms (Gust Front Algorithm) to be used in the TDWR system. This paper presents an overview of the Gust Front Algorithm system from data collection to products displays and discusses the performance of the algorithm during the 1988 OT&E. Data editing, product generation, ground truth and scoring issues are addressed. Scoring results for the various products are presented and problems identified during the OT&E are discussed. The design of the Gust Front Algorithm is discussed in the companion paper (Part 1 Current Status) numbered 1.6 in this preprint volume. The Gust Front Algorithm serves two functions: warning and planning. Warnings are provided in alphanumeric messages on a "Ribbon Display Terminal", Wind shear warnings are issued when a gust front impacts the runways or within 3 miles of the ends of the runways. The planning function consists of alerting an Air Traffic Control Supervisor when a change in wind speed and/or direction due to a gust front at the airport will occur within 20 minutes. This planning information is displayed on a Geographic Situation Usplay (GSD).

The gust front detection and wind shift algorithm is one of the two main algorithms developed for the Terminal Doppler Weather Radar (TDWR) program. This two-part paper documents some recent enhancements to, and the current status of, the algorithm (Part 1) and presents some results from recent testing of the algorithm during the TDWR Operational Test and Evaluation (OT&E) (Part 2: Klingle-Wilson et al., 1989).