Publications
Application of a resilience framework to military installations: a methodology for energy resilience business case decisions
Summary
Summary
The goal of the study was to develop and demonstrate an energy resilience framework at four DoD installations. This framework, predominantly focused on developing a business case, was established for broader application across the DoD. The methodology involves gathering data from an installation on critical energy load requirements, the energy...
Boston community energy study - zonal analysis for urban microgrids
Summary
Summary
Superstorm Sandy illustrated the economic and human impact that severe weather can have on urban areas such as New York City. While flooding and wind damaged or destroyed some of the energy infrastructure, all installed microgrids in the New York City region remained operational during Sandy, including those at Princeton...
Development of a real-time hardware-in-the-loop power systems simulation platform to evaluate commercial microgrid controllers
Summary
Summary
This report describes the development of a real-time hardware-in-the-loop (HIL) power system simulation platform to evaluate commercial microgrid controllers. The effort resulted in the successful demonstration of HIL simulation technology at a Technical Symposium organized by the Mass Clean Energy Center (CEC) for utility distribution system engineers, project developers, systems...
Multi-lithic phased array architecture for airborne sense and avoid radar
Summary
Summary
Transmit and receive Ku-band phased array designs are described for testing an airborne sense and avoid radar. The arrays are small with a size of 24 cm x 9 cm and operate from 13 to 17 GHz with electronic scanning from plus of minus 45 degrees in azimuth and plus...
Stepped notch antenna array used as a low thermal resistance heat sink
Summary
Summary
A stepped notch antenna at Ku-band is developed to provide a thermal heat sink for active arrays. The antenna with forced air cooling provides up to 0.4 degrees C/W of thermal resistance. The antenna integration with a printed circuit board allows for high volume surface mount assembly of active devices.
Leading the charge - microgrids for domestic military installations
Summary
Summary
In today's interconnected battlefield, our war fighters are increasingly reliant on capabilities at domestic military installations to support critical missions, often in near real time. Many of the domestic installations of the U.S. Department of Defense (DoD) also support everything from sensitive research and development facilities such as microelectronics and...
Interdependence of the electricity generation system and the natural gas system and implications for energy security
Summary
Summary
Concern about energy security on domestic Department of Defense installations has led to the possibility of using natural gas-fired electricity generators to provide power in the event of electric grid failures. The natural gas system in the United States is partly dependent on electricity for its ability to deliver natural...
Microgrid study: energy security for DoD installations
Summary
Summary
Growing concerns about the vulnerability of the electric grid, uncertainty about the cost of oil, and an increase in the deployment of renewable generation on domestic military installations have all led the Department of Defense (DoD) to reconsider its strategy for providing energy security for critical domestic operations. Existing solutions...