Publications

Refine Results

(Filters Applied) Clear All

Ring array antenna with optimized beamformer for simultaneous transmit and receive

Published in:
2012 IEEE Antennas and Propagation Society International Symp. and USNC/URSI National Radio Sci. Mtg., 8-14 July 2012.

Summary

In order to avoid self-interference, Simultaneous Transmit And Receive (STAR) systems require low mutual coupling between their respective transmit and receive antennas. This paper discusses the development of an 8-element transmit ring array antenna on a circular ground plane with a raised receive element. When combined with a beamformer that supplies linear progressive phase shifts to the array with opposing elements phased 180-degrees apart, the receive and transmit antennas are measured to exhibit 55 dB of isolation and omni-directional patterns in the 2.4 to 2.5 GHz band.
READ LESS

Summary

In order to avoid self-interference, Simultaneous Transmit And Receive (STAR) systems require low mutual coupling between their respective transmit and receive antennas. This paper discusses the development of an 8-element transmit ring array antenna on a circular ground plane with a raised receive element. When combined with a beamformer that...

READ MORE

The MIT IAP radar course: build a small radar system capable of sensing range, Doppler, and synthetic aperture (SAR) imaging

Published in:
Proc. of the 2012 IEEE Radar Conf., 7-11 May 2012.

Summary

MIT Lincoln Laboratory sponsored a radar short course at MIT campus during the January 2011 Independent Activities Period (IAP). The objective of this course was to generate student interest in applied electromagnetics, antennas, radio frequency (RF) electronics, analog circuits, and signal processing by building a short-range radar sensor and using it in a series of field tests. Lectures on the fundamentals of radar, modular RF design, antennas, pulse compression and synthetic aperture radar (SAR) imaging were presented. Teams of three students built a radar system from a kit. This kit was developed by the authors and uses a frequency modulated continuous wave (FMCW) architecture. To save costs, empty metal coffee cans are used for antennas, components are mounted on a wood block, the system uses only six coaxial microwave parts, analog circuitry on a solderless breadboard, and runs on eight AA batteries. Analog data is acquired by the audio input port on a laptop computer. The total cost of each kit was $360 which made this radar technology accessible to students. Of the nine student groups, all succeeded in building their radar, acquiring Doppler vs. time and range vs. time plots, seven succeeded in acquiring SAR imagery, and some groups improved the radar system. By presenting these difficult topics at a high level while at the same time making a radar kit and performing field experiments, students became self motivated to explore these topics and much interest in radar design was generated.
READ LESS

Summary

MIT Lincoln Laboratory sponsored a radar short course at MIT campus during the January 2011 Independent Activities Period (IAP). The objective of this course was to generate student interest in applied electromagnetics, antennas, radio frequency (RF) electronics, analog circuits, and signal processing by building a short-range radar sensor and using...

READ MORE

Coherent beam combining of large number of PM fibres in 2-D fibre array

Published in:
Electron. Lett., Vol. 42, No. 18, 31 August 2006, pp. 17-18.

Summary

Coherent combining of a record 48 PM fibres in a phased array configuration is reported. The resulting Strehl ratio degrades by
READ LESS

Summary

Coherent combining of a record 48 PM fibres in a phased array configuration is reported. The resulting Strehl ratio degrades by

READ MORE